In-Skin Voice Mail Progamming – Version1

This list shows the must program areas for In-Mail to work based on IPKII system defaulted with ESI(8), SLI(8), COI(8) and an 8-port version any of the following: VMP/VMS/FMS/CTI/CTP. For voice mail with less or more port adjust as needed.

Basic Function and pilot of 200 without Auto Attendant:

10-09-01: Set at least one resource to “ICM/TRK”.

11-07-01: Set TEL group pilot 2 to 200.

15-02-26: Set to VM (1)to duplicate IPKI function.

15-03-01: Set extension 117-124 to DP.

15-03-03: Set extension 117-124 to Special.

16-02-01: Put 117-124 in group 2.

16-01-01: Set group 2 name to VM Hunt.

16-01-04: Set group 2 to Circular.

16-01-10: Set group 2 to Busy/ No Answer.

45-01-01: Set to group 2.

To Route CO Calls to pilot of 200 for Auto Attendant:

22-02-01: Set all trunks to be routed to auto attendant to DIL (4).

22-07-01: Set all trunks to be routed to auto attendant to 200.

To Get Caller ID (CID):

10-02-01: Set trunk access code.

14-01-22: Allow CID to voice mail for all CID trunks.

14-02-10: Allow CID for all Analog trunks.

15-03-09: Used only for Single Line phones, allow CID display.

15-07-07: Set function key for incoming CID list display (Function 08).

20-02-08: CID display hold time (default = 5 seconds).

20-06-01: Set Class of Service for phones.

20-09-02: Allow CID feature for class of service.

In voice mail make sure integration option CID=0,0 is set