New IPKII CPU to replace old IPK or 192 CPU:
750048 CPUII 100 (U10) CPU Replacement for IPK CPU
750879 Remote S/W Upgrade Activation If Purchased without System Package
     
Questions Below Determine Replacement or New Parts Required in IPKII
Question  If "Yes" New Part Part Description Notes
More than 64 Ports in the existing system?  Need PKUII 750110 PKUII-U Unit for IPK II Required if >64 Ports Total
Is there an existing PRI Card?    Need to replace with new DTI (U40) 750196 DTI-U40 ETU DTI is both T1 and PRI Card in IPKII
Is there an exiting VRS Card?  Replaced by DSPII and VRS FD 750118 DSPII-U10 DSPII Is Used for VRS OR InMAIL (Never Both)
      750886 IPK II VRS FD VRS Messaging use with 750118
Do they need a modem?  Need Internal Modem (LAN built in) 750464 MOD-U10  
Is there an existing CCH Card  Firmware Upgrade is Required 750881 Elite IPK to IPK II CCH Firmware Upg CD
Is there an existing PC Assistant?  Need Upgrade 750876 IPK PC Assistant Upgrade Kit Activates 3rd party CTI (need PC/Server on Network)
Is there an existing PC Attendant?  Need Upgrade 750884 IPK PC Attendant Upgrade Kit Activates 3rd party CTI (need PC/Server on Network)
Is there a Call Analyst?  Is it 1.0 or Lite?  Needs to be upgraded 2.0 750882 Call Analyst Upgrade from 1.0 to 2.0
         
IPK II has a new Door Phone Interface (2 Port) Which also supplies External Music Source Connectivity or External Paging when more than one of these are required.
For Music and Paging, if 2 or more are necessary - the built in port on the KSU becomes disabled and ports are used on the PGD adapter.  Each PDG is 2 ports and
uses an ESI port for the physical connection.  The ESI Port must be the NEWER ESI U20 Card.    
Is there a Door Phone?  How Many?  Need to replace DPH Card with  750305 PGD(2)-U10 ADP Paging/Door Phone/MOH Interface 2 Ports
Is there external Paging? Over 2?  new PGD and ESI U20 ports 750305 PGD(2)-U10 ADP Paging/Door Phone/MOH Interface 2 Ports
External Music On Hold? Over 2?   750305 PGD(2)-U10 ADP Paging/Door Phone/MOH Interface 2 Ports
           
Do they use CTA or CTU Adapters?  Works, needs new ESI U20 Card 750211 ESIB(8)-U20  
      750219 ESIE(8)-U20  
Do they use SLT Adapters?  Need new SLT II & new ESI U20  750480 SLTII(1)-U10 ADP SLT&ESIU20** NO Msg Wait or Loop Disconnect
       
Do they need SMDR?  Need SMDR Activation Key 750880 SMDR ACTIVATION KEY  
Do they want PC Pro in addition to WebPro?  Add PC Pro (Licensed Copy) 750875 IPK II PC Programming Web Pro is Included with IPKII
Do they want new IPK II Covers (Elite 192)?  One per cabinet 750605 IPK / IPK II Cover  
Items Below CANNOT be Re Used in IPK II    
Are there any EPRO phones (ETW)?  Cannot Reuse - Replace with DTH or DTR   CANNOT REUSE
Is there In Skin Wireless?  Replace with DECT     CANNOT REUSE
Is there an existing Call Center Application?  Cannot Migrate ACD Plus, ACD II or Elite STAT Use InACD on IPK II CANNOT REUSE
Items Below are Inclulded or No Longer Needed in IPKII    
Existing CLK  (Clock)  Already included on IPK II CPU     SPARE PARTS
Are they using PBR card?  Already included on IPK II CPU     SPARE PARTS
Using Caller ID Scrolling or LCR?  Already included on IPK II CPU     SPARE PARTS
Existing IPCA (IP Co Processor) and MG?  Not Necessary - configure PVA with IP Clients   SPARE PARTS
Cascade CPU Implemented?  Not Necessary, add parts to IPK II (Wire For in MQ) SPARE PARTS
Verify Firmware on the Following (IPK II Requirement Listed) All are available from NTAC Downloads:
SLIB4 needs 1.73 Firmware
DTI needs 5.0 Firmware
BRT needs 4.0 Firmware
ITH Megaco IP Phone requires Firmware l.26
IP Video Softphone requires Version 2.4.1.0
IAD card firmware upgrade
CCH Card firmware upgrade with chip