VRS Message Waiting Feature (Auto Answer with delay
message)
VRS Message waiting via Ring Groups
22-04-01 Assigns phones to a ring group
22-05-01 Assigns trunks to a ring group per night mode
22-14-01 1st message wait start time
0~64800 seconds
This is the amount of time the phones will ring before the VRS
picks up and plays the first message
22-14-02 1st Waiting message number
0~49
0 = NO Message
1~48 = Messages 1~48
49 = Fixed Message
This is which one of the messages will it play as the first message.
22-14-03 1st Waiting message sending count
0~255
This is the amount of times it replays the message before moving
on to the second message. It uses 22-01-01 as the timer between
messages
22-14-04 2nd waiting message number
0~49
0 = NO Message
1~48 = Messages 1~48
49 = Fixed Message
This is which one of the messages will it play as the first message.
22-14-05 2nd waiting message sending count
0~255
This is the amount of times it replays the message before moving
on to the second message. It uses 22-01-01 as the timer between
messages
22-14-06 Tone kind at message interval
0 = Ring back tone
1 = MOH
2 = BGM Source
This is what the caller hears after the VRS answers and plays a
Message
22-14-07 Disconnect Time after end of VRS message
0 = No Disconnect
1~64800 seconds = Amount of time it waits after the last message
is played before disconnecting the caller
22-01-11 VRS Message waiting time interval
0~64800 seconds
This is the amount of time in-between each message.
22-01-10 VRS waiting message operation
0 = Always ON
1 = Enable/Disable by manual activation
15-07-01 Programmable function keys
52 = Toggle key for turning the feature On and Off
When programming this key the secondary data is the ring group #
11-10-20 VRS Record/Erase message code
Default code is 616
20-07-13 VRS Record for Class of Service
Per class of service Allow or Deny the ability to Record/Delete
the messages
20-06-01 Assigns extensions to a class of service
20-15-11 Ring Cycle for VRS message waiting feature